TroubleshootingPublished Nov 16, 2026·byCharles McQuain

Airalo Not Working? 10 Fixes for iPhone & Android

Step-by-step fixes for Airalo “No Service” on arrival, no data, APN and install errors, hotspot, slow unlimited plans, and top-ups, for both versions of the Airalo app.

Traveler with a backpack checking his phone on a busy street near Westminster in London

Disclosure: This guide contains affiliate links. If you purchase through our links, we may earn a small commission at no extra cost to you.

How I Put This Guide Together

I'll be upfront: an Airalo eSIM hasn't failed on me. My Paris trip in May 2026 was on Saily, and London in September was on Ubigi, and both just worked. The one time a travel eSIM did leave me stranded, landing at Orly on my honeymoon in January 2023, the fix was a single toggle: Data Roaming was off.

So instead of guessing, I went through Airalo's own help center article by article on November 16, 2026, and checked every step and error message below against it. Where Airalo's pages disagree with each other, or with what other sites say, I've said so.

First: Which Airalo App Do You Have?

Airalo now runs two versions of its app, and several fixes are different depending on which one you have. Open the app and look at the tabs along the bottom:

New Airalo

You see a Packages tab

You set up your phone once, and every package you buy is added to that same eSIM. Always data-only. APN is set automatically, with globalapn as the manual fallback. You can re-run setup if something goes wrong.

Public Airalo

You see a My eSIMs tab

Each purchase is its own eSIM with its own install instructions. Some plans need a specific APN, some include calls and texts, and most eSIMs can only be installed once, so don't delete one you still need.

Quick Fix Checklist

These are the checks Airalo itself lists first, in the order that fixes the most problems. Work down the list before reading anything else:

1

Make sure you're in a covered country

An Airalo eSIM only connects inside the countries its package covers. If you installed it at home, "No Service" before you land is normal.

2

Turn the Airalo line on and select it for data

iPhone: Settings > Cellular > tap the Airalo line > Turn On This Line, then Settings > Cellular > Cellular Data > choose Airalo. Android: Settings > Network & internet (or Connections > SIM manager) > turn the eSIM on and set it as the mobile data SIM.

3

Turn off Airplane Mode

Then wait a few seconds for the phone to search for networks.

4

Check the APN

New Airalo: Automatic, or type globalapn. Public Airalo: use the APN in the app's connection instructions. Full steps below.

5

Turn on Data Roaming for the Airalo line

Airalo connects through local partner networks, which your phone treats as roaming. On iPhone, roaming is set per line, so leave it off on your home SIM. On many Android phones roaming applies to every SIM, so turn your home SIM off to avoid charges.

6

Pick a supported network manually

Turn off automatic network selection and choose a network listed in your package details. This fixes most "No Service" problems on arrival.

7

Restart

Toggle Airplane Mode on for 30 seconds and off again, or restart the phone, so it re-registers on the local network.

Stuck Without Data Right Now?

You don't have to wait for Airalo support to get online. Most phones hold several eSIMs, so you can install a backup from another provider on airport or hotel Wi-Fi in a few minutes and keep troubleshooting Airalo later. Don't delete your Airalo eSIM to make room unless you've read the reinstall section below.

1. Airalo Says “No Service” After You Land

This is the most common Airalo complaint I found, and it usually means your phone is trying the wrong network. Airalo's fix is to choose the network yourself.

Find which networks your package supports

New Airalo: open the package in the Packages tab and look at Package Details. Public Airalo: My eSIMs > View Details, where the networks are listed near the ICCID.

Select the network manually

iPhone: Settings > Cellular > [Airalo line] > Network Selection > turn off Automatic, wait for the list, and tap a supported network.

Samsung: Settings > Connections > Mobile networks > Network operators > Select manually.

Pixel: Settings > Network & internet > [Airalo eSIM] > Advanced > Carrier > turn off Automatically select network.

Stuck on “Activating” on iPhone

If you installed at home, Airalo says the eSIM should activate by itself once you reach your destination. Turn the line on, turn on Data Roaming, and give it a few minutes after landing before you try anything drastic.

Crossed a border?

A country package stops at the border, and near a frontier your phone can grab a foreign network. Select a supported network manually, or use a regional plan if your trip covers several countries.

Try 4G instead of 5G

5G is only available in some countries and depends on your phone. Airalo suggests switching to 4G/LTE (or even 3G) to get connected, then switching back. iPhone: Settings > Cellular > [Airalo line] > Voice & Data > LTE.

2. Signal Bars but No Data: Check the APN

If you have bars but nothing loads, and Data Roaming is already on, the APN is the next suspect. An error that says “PDP Authentication Failure” almost always means a wrong or missing APN, though Airalo says it can also mean you're out of data or on an unsupported network.

Which APN to use

  • check_circleNew Airalo: the APN should be Automatic. If it isn't, type globalapn.
  • check_circlePublic Airalo: the APN depends on the plan. Find it under My eSIMs > View Details > “Ready to use your eSIM?” > Connect to a Network > How to connect.
  • infoType it in lowercase as one word, and leave the username and password blank.

Set the APN on iPhone

Settings > Cellular > [Airalo line] > Cellular Data Network > enter the APN in the Cellular Data field. Fill in the Personal Hotspot field too if you plan to share data.

Set the APN on Samsung

Settings > Connections > Mobile networks > Access Point Names > Add. Name it “Airalo,” enter the APN, save, and select it.

Set the APN on Pixel

Settings > Network & internet > SIMs > [Airalo eSIM] > Access Point Names > tap + , enter the APN, save, and select it.

3. Airalo eSIM Won't Install: Error Messages Explained

Install on a stable Wi-Fi connection before you travel, and don't leave the activation screen until it finishes. Hotel, ship, and airport Wi-Fi cause a lot of failed installs. If you see one of these errors, here's what Airalo says it means:

“Unable to Complete Cellular Plan Change”

Common causes: too many eSIMs already on the phone, cellular data turned off, a weak connection, or the eSIM is already installed. Check for it under Settings > General > About, where installed eSIMs show their ICCID, before you try again.

“This code is no longer valid”

The eSIM was already installed, an earlier install was interrupted, or something on the phone is blocking it. Turn off any VPN, remove old unused eSIM profiles, and update your phone. Then use Retry device setup (new Airalo) or Direct Installation (public Airalo).

“Unable to Activate eSIM” (iPhone)

Setup didn't finish, the line or roaming is off, the internet connection dropped, iOS is out of date, the phone is carrier-locked, or a VPN or configuration profile is interfering.

“Cellular Plans From This Carrier Cannot Be Added”

Your phone is carrier-locked, and Airalo eSIMs can't be installed on a locked phone. On iPhone, check Settings > General > About > Carrier Lock: it should say “No SIM restrictions.” Only your carrier can unlock it, and a recently unlocked phone can still have eSIM disabled until the carrier finishes.

Lost the install instructions?

They can disappear from the app once an install starts. The order confirmation email has a PDF with the QR code and manual details (SM-DP+ address and activation code).

Not sure your phone supports eSIM at all? Dial *#06#: if you see an EID, it does. Or use our compatibility checker.

4. Deleted Your Airalo eSIM or Changed Phones

This is where the two app versions differ most, so check which one you have before you delete anything.

New Airalo: you can re-run setup

Open Packages, tap the Device Options (⋯) menu, and choose Retry device setup. Airalo still recommends turning the eSIM off rather than deleting it.

Public Airalo: most eSIMs install only once

Don't delete an eSIM you still plan to use. If you already have, go to My eSIMs and tap “Deleted your eSIM?” The app checks whether that eSIM can be reinstalled, and offers a replacement or sends you to support if it can't.

New phone mid-trip: no transfers

Airalo says an eSIM or package already assigned to one phone can't be moved to another. Apple's newer eSIM transfer features only work with carrier eSIMs, not Airalo's. Keep the old phone and share its data by hotspot, or buy a new package for the new phone. Our eSIM transfer guide covers other providers.

Turning the eSIM off doesn't pause it

Validity keeps counting while the line is off, and it can't be extended.

5. Airalo Hotspot Not Working

Airalo allows hotspot and tethering as long as your phone and the local network support it, and its unlimited plans allow it too, with no limit on how many devices connect.

iPhone: fill in the Personal Hotspot APN

If your phone has data but other devices can't connect through it, go to Settings > Cellular > [Airalo line] > Cellular Data Network and enter the same APN in the Personal Hotspot section: globalapn on new Airalo, or the app's APN on public Airalo.

Hotspot vanished from Settings?

On iPhone, Personal Hotspot can disappear when the APN fields are blank. Filling in the APN as above usually brings it back. If not, Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings will, but it also erases saved Wi-Fi passwords.

On an unlimited plan, everything you share through the hotspot comes out of the same daily full-speed allowance, so a laptop can use it up quickly.

6. Airalo Slow Speeds and Unlimited Throttling

Airalo's unlimited fair-use policy

  • •3 GB a day at full speed by default
  • •Then 1 Mbps for the rest of that day: fine for maps and messages, poor for video
  • •Resets every 24 hours from when you activated the eSIM, not at midnight
  • •Some packages use a different threshold, shown in the package details before you buy

If you're on a fixed-GB plan and it's slow, Airalo's advice is to try another supported network manually, switch between 5G and 4G/LTE, and restart. Speed also depends on the local partner network, which varies by country. If you need a lot of fast data every day, compare plans by price per GB for your destination.

7. Ran Out of Data or Top-Up Not Working

How to top up

New Airalo: buy a package from the Store or tap Top up in Packages. It's added to your phone automatically, with no new install. Local packages are used first, then regional, then global.

Public Airalo: My eSIMs > Top up. If there's no Top up button, that eSIM isn't rechargeable, and you'll need to buy and install a new one.

Top-up bought but no data

Restart the phone or toggle Airplane Mode on and off. If the package still doesn't appear, contact support.

Plan expired sooner than expected?

Validity usually starts when you first connect to a supported network in the destination, not when you install. But some plans in the public app start on installation. Check My eSIMs > View Details > Package Details > Validity Policy before you install early.

8. Airalo iMessage, Calls, and Texts Not Working

Most Airalo eSIMs are data-only. New Airalo is always data-only. In the public app, only plans labeled “Data / Calls / Texts” come with a phone number.

Fix iMessage and FaceTime

Go to Settings > Messages > Send & Receive (and Settings > FaceTime) and make sure your Apple ID email is checked. Keep your home line turned on for calls and texts, with its Data Roaming off, and iMessage will keep working over Airalo data.

Make calls over data

WhatsApp, FaceTime Audio, and other calling apps all work over an Airalo data connection.

9. Destination-Specific Problems

Turkey

Airalo says iPhones and iPads bought in Turkey before June 23, 2020 may have eSIM disabled. Visitors only need to register their phone's IMEI if they use roaming data for 91 days or more in a 120-day period. See our Turkey eSIM guide.

China

Airalo says you don't need a VPN on its packages that cover China, as long as you're using eSIM data and not hotel Wi-Fi. Some services, including some AI tools, block access from China on their own end, which no eSIM can fix. More in our China eSIM guide.

10. Contact Airalo Support and Ask for a Refund

Airalo's support is 24/7 live chat, in the app and on airalo.com. Its contact page doesn't list an email address or phone number. In the new app you can open a chat even without a data connection, which helps if you're stuck at the airport.

What to have ready

  • • Your order number
  • • The eSIM's ICCID (Settings > General > About on iPhone)
  • • Where you are and which network you tried
  • • Screenshots of any error message

Airalo's refund policy

  • check_circleRequest it in the app: Packages > order details (new Airalo), My eSIMs > View Details > Package History (public Airalo), or Profile > Orders
  • check_circle“Installation issues” and “eSIM not working” are listed reasons, and Airalo may offer a replacement eSIM instead
  • warningIn-app refunds are paid as Airmoney, Airalo's in-app credit, not back to your card
  • warningExpired or fully used eSIMs aren't eligible

Airalo's own tip: contact support before you install if you think you bought the wrong package. Older and translated versions of its refund page mention refunds to your original payment method, but the current English page doesn't, so ask support if you need that.

Still Not Working? Try a Different Provider

If you've worked through everything above and Airalo still won't connect where you are, a different provider may use a different local network. These three sell plans in most destinations and install in a few minutes.

Want to see every provider side by side? Airalo vs Saily, Airalo vs Nomad, or the full eSIM comparison →

Frequently Asked Questions